EN
← All guides
Hardware & settings

PS5: Ports, NAT and DNS Without the Headache

Published · 1 min read ·

Silent voice chat, online games impossible, Remote Play failing: your home network is sometimes to blame. Before touching your router's advanced settings, follow the order advised by Sony.

First, the simple steps

  1. Check the PlayStation network status page: an outage isn't yours to fix.
  2. Restart the PS5 and, if possible, switch to an Ethernet cable.
  3. Turn off the router, wait at least five minutes, turn it back on.
  4. Update the router's software, with your provider's help if needed.

The ports used by the PS5

On one of its error pages, Sony lists the ports to open if possible:

Opening them is done in your router's interface, not on the console. Each router has its own menu: ask your internet provider for help if you can't find it.

The fixed IP address

So that a port forwarding always targets the right machine, Sony suggests manually setting a static IP address in the console's network settings.

DNS

Among its troubleshooting suggestions, Sony also proposes temporarily changing the DNS settings to a free public DNS. If you had already entered a DNS by hand, check that the primary and secondary addresses are correct.

NAT type 3

The NAT type describes how easily your console communicates with others. According to Sony, NAT type 3 can prevent Remote Play. To check or change it, the help page refers you to your internet provider.

💡 Tip: Write down every setting you change in the router. If something goes wrong, you can easily go back.

If the problem persists, it may be a temporary overload of the line. Sony then simply advises trying again later. On big release evenings, patience sometimes does better than any setting.

Sources

Spotted a mistake in this guide? Let us know.