EN
← All guides
Hardware & settings

PS5: Safe Mode, a Last Resort

Published · 1 min read ·

When the PS5 refuses to start normally, or a problem persists, safe mode offers repair tools. Some are harmless, others erase everything. Here is how to find your way around.

Starting in safe mode

  1. Turn off the console by holding the power button for three seconds. The light blinks, then goes out.
  2. Hold the power button again. Release it at the second beep, about seven seconds after the first.
  3. Connect the controller with the USB cable, then press the PS button.

Options with no data loss

Options that erase everything

Before using them, back up your data to a USB drive or to online storage.

💡 Tip: Always try the options in order, from the gentlest to the most drastic. Rebuilding the database fixes a lot of problems without erasing anything.

If nothing works

Contact PlayStation support before resetting. An adviser can identify a hardware fault, in which case erasing your data would be pointless.

The console keeps restarting in safe mode?

Sony advises turning it off, unplugging the power cable for about twenty minutes, then plugging it back in. If the problem returns, try clearing the system software cache from the same menu.

Sources

Spotted a mistake in this guide? Let us know.